stuck slide
The slide on my brand new trailer is stuck in the out position. When I tried to pull it in, the back end moved, but the front end did not. After a few back and forth tries, neither end moves. My...
Forum Discussion
waynefi wrote:
Thanks for the suggestion about pushing it. I saw the mode button, but I assumed that if the line is shorted, that won’t work. It is a smaller slide, so pushing it shouldn’t be too hard.
Does the slide stay in well enough that it is safe to drive?
Once the room is retracted, reconnect the motor connects on the control module. THAT locks in the motors, but Schwintek's rarely will move. The force to retract will be the same force to cause extension in transit. So, the room will not move in transit. Doug
