Suburban SW6D Ignition Issue?
I recently went on an extended trip covering 3500 road miles with several 3-4 night stops along the way. at the first stop the water heater worked perfectly, at the second stop it worked perfectly unt...
Forum Discussion
Ceramic should be solid..no cracks.
Cracks allow high voltage used for spark ignition to go to ground vs creating spark at ground rod and in path of main flame.
Also spark electrode position can cause same issue........tip of electrode must be engulfed by main flame.
Burner tube flame spreader at end of tube must be squared/parallel with end of tube for proper flame disbursement
Cracks allow high voltage used for spark ignition to go to ground vs creating spark at ground rod and in path of main flame.
Also spark electrode position can cause same issue........tip of electrode must be engulfed by main flame.
Burner tube flame spreader at end of tube must be squared/parallel with end of tube for proper flame disbursement
