Hello,Has anyone out there ever seen schematics for the Surgeguard surge protectors.I have the old style 30amp version which may be toast after it took some kind of hit or surge or whatever. A new one is in the realm of $400 Canadian and I'd like to see if my old one is fixable.Anyways many thanks in advance. Just asking.GilSmithville, ON

Moved from Forum Technical Support

My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...

CA Traveler wrote:My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...X2

CA Traveler wrote:My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...X2Oops! X3

It might be an idea to contact them and seeing about repair Surge GuardI can understand not wanting to spend more than you have to and you might find some one local who can diagnose and repair.

Surgeguard Surge Protectors (schematics) | Good Sam Community

1492
Moderator
Jun 15, 2016
Moved from Forum Technical Support
CA_Traveler
Explorer III
Jun 15, 2016
My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...
Mandalay_Parr
Explorer
Jun 15, 2016
CA Traveler wrote:
My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...

X2
edatlanta
Explorer
Jun 15, 2016
CA Traveler wrote:
My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...

X2

Oops! X3
Shadow_Catcher
Explorer
Jun 15, 2016
It might be an idea to contact them and seeing about repair Surge Guard
I can understand not wanting to spend more than you have to and you might find some one local who can diagnose and repair.
KJINTF
Explorer
Jun 15, 2016
Typically very easy to repair
Hardest part of the job is getting the unit apart
Seal it up really good after completing repairs
Most failures I have seen as due to water intrusion
This one is the 50amp version
tvman44
Explorer
Jun 15, 2016
Don't waste your time with Surge Guard, all they will do is sell you a new unit. Just buy a Progressive Industries, life time warranty, servicable. Been there done that. Never a surge guard again. :)
GilONel
Explorer
Jun 15, 2016
Well it looks like Progressive Industries wins. Thanks to KJINTF for the picture though. Thanks to all for the advice.
MEXICOWANDERER
Explorer
Jun 15, 2016
Thank you KJITF!!!
One look at that board tells me what the Surge Guard DOESN'T have for even self-protection. A $19.95 strip has sseveral MOVs. What I do not see is TVS transient voltage suppressors nor do I see gas discharge tube devices. MOVs, TVS, and GDTs should be connected L-N L-EG N-EG
PatrickA51
Explorer
Jun 16, 2016
CA Traveler wrote:
My suggestion is to buy a new PI unit. Field replacement parts - life time warranty - consider where you're at now...

Buy a Progressive Industries Surge Protector they run circles around Surguard Surge Protectors