Trailer Battery Load Support
As a followup to my recent discussion about my newly acquired CTEK Multi US 7002 Charger I'd be interested in some further input on the subject of trailer battery load support. :) First, I should c...
Forum Discussion
full_mosey wrote:
SoundGuy:
Here is the Deka info you need.
I urge you to read page 2 - Charging, and page 3 - Temperature Compensation.
Note that there are only two Volt ranges, Charge and Float. You don't need 8 stages, but no harm will come to your battery. Your 7A charger is less than the 30% rate limit and it will be fine.
If you don't have a temp-comp charger, you might want to get an IR Gun to read the battery post temperatures to watch for the 95F limit.
Thanks for that link. :) I do have an IR gun so I'll keep that in mind since my CTEK doesn't offer temp compensation.
Wow, can't believe this thread is still alive, branching off into so many informative discussions! :B
