BFL13 wrote:
I only have an old WH but it does have the board with a 2 amp fuse. I think you are saying you by-passed the big plug with the pos wires that goes into the circuit board, and went to the fuse and then it all worked.
It can happen that plug, if it slides onto the edge of the board, loses good contact. Cure is to pull it off, clean off the contact part on the board and anything in the plug contacts and put it back on. Wiggle it some, see if that gets you contact again.
HI, I tried to wiggle them around thinking it might be a loose connection but didn't work. Thank you.