lawrosa wrote:
, if "ANY" load is put on the system (switch on some lights) it will immediately revert to 13.6 mode and stay there. This was confirmed to me by my own test and by WFCO tech support. It is like the WFCO senses a change in load and says "ok, user is using so I need to go into converter mode".
My wfco does a good job here.. Its in 13.2 mode now. I even went in and ran the heater for 10 minutes and it stayed in 13.2 mode...
Im sure if I put a larger load on it it will come out and go to 13.6...
That's not what you want man. It should have went to 13.6 immediately with a furnace coming on. Same old story with those things not going into boost or coming out of float. What is converter mode?
Like you mentioned i'd sure be looking at there new PD version with the L designation. That covers it all.
