Remote Pendant

Some chargers have a desulfate mode. This is useful for keeping the battery usable when the rig is in storage.

Yep, Tells you what stage charger is in and can use to manually change stages - great when trying for a rapid top-off when using genny...

Thanks to all of you . It sounds like I need it

RJsfishin wrote:
Every now and then when I fire up my PD, it is not in the 14v bulk stage. Thank God for the pendant override !

This... for when time doing other things is more important than having a charger take it's sweet time topping off batteries when you really need to get them filled back up with a charge. Sometimes at a slight loss of battery life or length of serviceability.

my Powermax always starts in 14.6

Also people have mentioned cases where it lets you drop to 13.6 from 14.4 if your generator is maxed out and can't do it at 14.4. Later you can then put it back to 14.4 when the gen can handle that now.

RJsfishin wrote:
Every now and then when I fire up my PD, it is not in the 14v bulk stage. Thank God for the pendant override !

Yep. Tells you what stage of charging it is in. And, lets YOU change it.

So, if only ran batteries down some overnight, and start genny to charge batteries in the am, if the battery voltage is not low enough, it will NOT go into bulk charging. Pendant tells you that, and then you just push the button, and it forces it into bulk charging for a period of time. MUCH better use of benny run time.

It is not free, but is not expensive either.

Every now and then when I fire up my PD, it is not in the 14v bulk stage. Thank God for the pendant override !

Better to have it and not need it, than to need it and not have it. My PD4655 has that function built into the 12v distribution board. I am glad it is there even though all I have ever done is look at it to see what the converter is doing.

Never mind what it is, you need it !

W/o it, you mite think its a WFCO ! :)

Actually its for to grab a different gear in your converter.