Winegard Sensar III wall plate
As a new RV owner, I am struggling to understand the operation of the wall plate where the 2 cables attach, one from the antenna, and the other from the cable input jack mounted on the rear left of th...
Forum Discussion
TXJax wrote:
Is the Sensor Pro really that good? What would the connection for an amplified antenna's wall plate really be? and Does anyone know the model number for the wall plate that would go with a Sensor IV? Winegard's "for all models" instructions are not helpful.
Little confused by your question :h - the Winegard SensarPro doesn't require the use of any "wall plate" as it replaces the wall plate, the biggest difference being it offers +/- 10 db of signal gain / attenuation which a conventional passive wall plate does not. The antenna cable feeds the SensarPro input, 12 vdc supplied by the trailer is connected to the SensarPro to drive it and is also routed to your new Sensar IV antenna head which contains a signal amplifier of it's own, and the SensarPro provides 2 outputs which can be used to feed up to 2 television sets.
