Winegard Sensar III wall plate
As a new RV owner, I am struggling to understand the operation of the wall plate where the 2 cables attach, one from the antenna, and the other from the cable input jack mounted on the rear left of th...
Forum Discussion
GaryS1953 wrote:
"the Winegard SensarPro doesn't require the use of any "wall plate" as it replaces the wall plate,"
Pardon me for jumping in, but does this mean the SensarPro Wallplate removes my existing 12 volt plug?
Sure, but if retaining that 12 vdc outlet is so important then just leave it as is, mount the SensarPro in a surface mount box as I did and locate it near the wall plate, then run +/- 12 vdc from the wall plate to the SensarPro, and simply connect the coax cables from the wall plate to the SP. In my case, I instead removed the wall plate and built a custom box with a 1/4" TS jack for +/- 12 vdc and added kill switches for the stereo and SensarPro for those times we may be dry camping and I want to minimize draw on the battery.
