Xantrex prosine 2.0 problem. Again
It's not passing the shore power (or Gen power) through to the rig. There are no error codes or messages. It is in line with ONE leg of our 50Amp service. We are plugged into a 30Amp outlet. We hav...
Forum Discussion
I dumped my Xantrex PS1800 with transfer switch when it failed. Replaced with stand alone Go Power inverter (2000w sw) and separate Progressive Dynamics transfer switch. Battery is charged by solar since install. I do have a converter to switch on if needed. Way prefer separate components.
You have plenty of room for all this. Possibly move the inverter down for more ventilation and use the top shelf for the cord and provisions.
I probably posted the same the first time you had trouble. Picture looks familiar ;)
You have plenty of room for all this. Possibly move the inverter down for more ventilation and use the top shelf for the cord and provisions.
I probably posted the same the first time you had trouble. Picture looks familiar ;)
