Xantrex prosine 2000 over temp
My prosine 2000 is giving me a fault code that temp 1 is too high. If I clear the fault or if I power the unit off and turn it back on, it will start and charge the house batteries at a high current ...
Forum Discussion
ramblinwreck wrote:
It's not the batteries that are overheating. Battery temp wasabout85F. Indication says temp1 overheat but of course there is no documentation to tell what temp1 monitors.
The temp 1 too hot display means the it has shut down due to high internal temperature of the inverter/charger. There are two possible reasons.
Too high a load.
Not enough ventilation.
