Don't know if fits, easy enough to check, A being the most common issue.
'A' from camper floor to underside of nose
=minimum from Truck bed to top of cab (or cab ID lights if equipped). Ford cab is a bit taller so this more often problem with older campers
'B' width of camper floor- rarely an issue
'C' width of bump-out if it has. Total of B & C is needed minimum width of tail gate opening. On ours I need to load with camper pretty close to
right wheel well for this bump-out to clear left tailgate pillar
'D' Front of camper rubber bumpers to back side of rear wall.
Minimum distance of trucks front bed wall to taillights. Again on ours, I had to add spacers behind campers rubber bumpers as camper was 1/4"
away from taillights, least crooked loading and camper would be against one of the taillights.
