2014 3500 Duelly driver fender spreading
I had an ODD experience with my 2014 Ram 3500 duelly 1 Ton truck and my Lance 1172. On a recent trip after unloading the camper, I noticed that a rear panel under end of the truck bed had bent, and w...
Forum Discussion
HMS Beagle wrote:
If I was seeing this problem I would put something more substantial across the bed. A few flat 2x4s would be much stiffer than plywood, better still would be some 2" square or rectangular steel tubes...
....wouldn't that narrow 2 inch steel add really acute load points laterally along the corrugated tin bed (and potentially permanently deflect the corrugation; even right through a rubber bed mat) ?
