Forum Discussion
blt2ski
Sep 14, 2018Moderator
With some GM rigs, it's been the color coded wires taped up around the center to left/drivers side of bumper. You may may not need to install a fuse vs blank in one of fuse panels etc. The other ends may be loose tied taped up in engine compartment under dash.
Worst case, you have to run 2 wires from front, or splice into other wires at back to make things work.
Marty
Worst case, you have to run 2 wires from front, or splice into other wires at back to make things work.
Marty
About Travel Trailer Group
44,043 PostsLatest Activity: Jul 18, 2025