Aluminum Camper Cradle
I teased this in another thread but thought I would start a new one completely. My Bigfoot Camper is not tall enough to clear the roof of my cab and needs to be lifted about 3". For several years, I r...
Forum Discussion
opnspaces wrote:
Never had a truck camper. But shouldn't there be support across the whole bed and not just at the edges?
The fink foam is actually quite dense and was what I supported the entire camper on prior to this project. It will support the middle just fine. Most of the weight is on the perimeter of the camper but support does need to be in the center to help support the holding tanks. The pink foam is more than sufficient for the task.
