Chassis cab vs pickup box delete?

the last time i checked into it the bed delete the dealer charges you and takes the bed off at dealer a chasis cab comes from factory or another lot as a flleet truck

I got my Ford as an 'incomplete' vehicle with no bed, just frame rails.

There's a slight difference in wheelbases, about 4", at least right now. (I also noticed this holds true for Dodge and Ford as well.) A reg cab 3500 PU w/8' has 134"; CC w/8" has 138". Same goes for crew cab models too. I'm thinking it probably has to do with "standard" bed manufacturer CA dimensions - i.e. 60", 84"...

I also thought there was a difference in frame rails, but I'm not sure about that one.

GM Car and Truck Guide

Cab chassis are 4" longer cab to axle (it's called CA) and the frame rails are a standard 34" wide and they are straight. It makes it easier to mount utility boxes and flat beds on them. So if you remove the box off of a standard PU you will need a body for a 56" CA over 60" CA for the cab chassis.

Denny

One is also better off with a chassis cab, as it comes with light wires etc ready to install after market beds, where as the box removed, the wires etc are only set up for the box. Along with being as you usually do not have a installed door placard, the aftermarket body manufacture is in charge of installing it. You can do other things to the truck, to increase gvwr, put a full gvwr equal to the axel limits, put a tag, drop or other axel on it, and increase gvw too!

At the end of the day, besides what other have mentioned on the frame etc, the above helps and makes it better to do a chassis cab vs box delete option!

Marty

From another perspective, based on my experience, I would never choose the 'box delete' but just get the full truck and then remove the box. The cost savings from the 'box delete' is less than what a new take-off bed and bumper can be sold for. Even though there are many take-offs, the demand at auto body shops generally works in your favor. Prices for brand new factory beds is thru the roof, so truck owners and body shops are all too happy to save some $$.

When I removed my take-off, it was sold in a few days and the body shop sent a flat bed tow truck 35 miles and picked it up at my house. Looking at upgrading to a new tow vehicle soon and I will move the utility bed to the new truck. Selling the take-off bed/bumper will more than cover the cost of putting a simple flat bed on the old truck to make it ready for market.

The cab and chassis has the same frame measurements regardless of brand. Chrysler, Ford, GM, Freightliner, KW, etc. The utility bed can be designed to better utilize bed space. Generator, extra fuel tanks, outdoor kitchen, etc. can stay with the truck. Also the bed rail to trailer clearance is no longer a problem especially if you are going with a 4 X 4.

The last time I looked at GM cab & chassis they had a nice large rear antisway bar that the regular pick-up didn't have. I think GM also gives you the option of dual fuel tanks on the C&C, no so on a pick-up.

Another angle....cab.chassis...is an "incomplete vehicle"....,MAKE CERTAIN your insurance carrier...has a way for you to Complete ....the vehicle.....save yourself hassles......not all states are same....may....or....may not be an issue..where YOU live.:W

On the Ford C&C with the 6.7 diesel you lose 100HP and 140lbs of torque. The turbo is also different on the C&C as well as the exhaust, the DPF and where the DEF empties into the exhaust is swapped vrs. the regular truck.
You also get a higher GVWR with the C&C. The 450 gets 19.5" wheels vrs the 17" on the regular truck.