Crown Designed Into Chev and GMC Truck Beds
HI Folks: I just came away from the Towing Forum and found out that Chev and GMC Trucks have been designed to have a crown designed into their truck beds (truck bed is not flat lengthwise). Link http...
Forum Discussion
That's pretty amazing. The engineers obviously don't think about how the trucks will be used when they design their beds. First, they changed their tail gate width and now this change. Sounds like they have too much time on their hands. Of course, it could be a manufacturing defect.
In any case, for the truck camper, I'd probably ask Lance what they recommend. I wouldn't be surprised if the bottom of the camper flexed enough to "level". The beds are usually attached on top of bushings. Another thought is to change the bushings under the middle of the bed to smaller ones if that is how they are crowing it.
In any case, for the truck camper, I'd probably ask Lance what they recommend. I wouldn't be surprised if the bottom of the camper flexed enough to "level". The beds are usually attached on top of bushings. Another thought is to change the bushings under the middle of the bed to smaller ones if that is how they are crowing it.
