Crown Designed Into Chev and GMC Truck Beds
HI Folks: I just came away from the Towing Forum and found out that Chev and GMC Trucks have been designed to have a crown designed into their truck beds (truck bed is not flat lengthwise). Link http...
Forum Discussion
Jim&Carolyn wrote:
I am so glad to hear that someone else is having this same problem as I am. I've tried everything everyone has suggested to me and I still have a porpoising problem also.
The next thing I was going to try was placing a 1x6 board on the rear of the truck bed to shift it up slightly.
Please let me know if your solution works.
Hi Jim and Carolyn: I will let everyone know how it works out when I put a 12"X 48" piece of 1/2 inch plywood glued under the 4'x8'x1/2" sheet right across at the rear. My response on how it dampens the porpoising will have to wait until spring as my camper is on blocks and winterized. If anyone tries it before me, I sure would like to hear about it.
