Forum Discussion

MTBob's avatar
MTBob
Explorer
May 14, 2013

DIY Spring Extender - Rev 1 - Half-a-Puck, PICS

This post is a follow-up to my earlier post asking for ideas about how to make something like the commercial Stable Loads - what I'll call spring extenders (Chevy 1 Ton, SRW). After fiddling with var...
Truck Campers
jimh406's avatar
jimh406
Explorer III
May 14, 2013
MTBob wrote:
I don't understand your question. The new disks replace the thin disks that come inserted in the holes in the overload springs.
I'll get a couple more photos to show the disk in place.


Many of us put an extender near the top/end of the spring where the bump stop is that makes contact to the inner overload spring instead of the center/outer leaf.

About Travel Trailer Group

44,060 PostsLatest Activity: Jul 17, 2025