Hi,I am looking to buy a one ton diesel truck and need a high payload for the trailer I am looking to get. I am pushing the limits of a SRW but really don't want a dually so I want the highest payload I can find with the features I want/need. The truck will be a crew cab and probably a long bed and I am looking at the Laramie package. I realize that all of these options reduce the payload. For any of you who have this truck can you tell me what your DOOR STICKER says for max payload (along with whether your truck is a crew cab, etc. The F-350s I have looked at that are similarly equipped are around 3200. I am hoping I can get a bit higher than that. thanksMatt

Get a gasser and you'll get 800 more lbs.

troubledwaters wrote:Get a gasser and you'll get 800 more lbs.X2Look at the Tradesman model, typically these are the work trucks and will have the highest ratings

GordonThree wrote:troubledwaters wrote:Get a gasser and you'll get 800 more lbs.X2Look at the Tradesman model, typically these are the work trucks and will have the highest ratingsOP stated HEAVY trailer! Get a diesel Tradesman, I test drove a 2017 Tradsman SRW CTD long bed with over 4,000# payload.

4000# for a 3500, that's only 700 more than my gasser 2500 at 3300#

GordonThree wrote:4000# for a 3500, that's only 700 more than my gasser 2500 at 3300#Yep, your pulling a 3,500# GVWR TT with a 6.4 Hemi and 4.10 gears. Most likely the OP is likely looking at a 5er about 10,000# heavier than your TT, likely 13,000 to 15,000 GVWR. Not so much fun with a gas engine.

Dodge Ram 3500 SRW Max Payload???? | Good Sam Community

4x4ord
Explorer III
Mar 01, 2018
Me Again wrote:
4x4ord wrote:
My Aluminum F350 has a carrying capacity of 3322. I am really surprised that the Ram, with the heavier
cast iron engine and steel body, is still a much lighter truck.

What's you GVWR, my SB RAM is 11,700. LB are 12,300. Chris

I just looked at my door sticker. My SRW sb 4x4 crew cab diesel has a carry capacity of 3322 and a gvwr of 11500. The rear axle rating is 7230. I weighed my truck and with 3/4 tank of fuel, B&W hitch and a 215 lb driver the rear axle weighed 3473 lbs. So I will be good on the rear axle rating with up to 3750 lbs of pin weight. If I was worried about staying within the gvwr I'd have to stay under 3050 lbs of pin weight. (Total weight of truck once I add in my wife's weight is 8450 lbs.) How much weight can be added to the Dodge 1 ton SRW rear axle?
Cummins12V98
Explorer III
Mar 01, 2018
blofgren wrote:
4x4ord wrote:
My Aluminum F350 has a carrying capacity of 3322. I am really surprised that the Ram, with the heavier
cast iron engine and steel body, is still a much lighter truck.

I'm not so sure about that; my truck with 3 of us in cab, full of fuel and fifth wheel hitch is over 9,500 lbs. But with 14,000 GVW, I still have plenty of wiggle room......:B

License it properly and you can actually load to your RAWR.
2012Oudoorsman
Explorer
Mar 01, 2018
bowler1 wrote:
DOOR STICKER says

My door sticker is just over 4000lbs with a 2016 Bighorn CCLB SRW Cummins Aisin combo. This also includes 5th wheel prep and wheel to wheel running boards. Have yet to weigh it on a scale but was quite happy with the stickered payload when i received it.

Me Again wrote:
4x4ord wrote:
My Aluminum F350 has a carrying capacity of 3322. I am really surprised that the Ram, with the heavier
cast iron engine and steel body, is still a much lighter truck.

What's you GVWR, my SB RAM is 11,700. LB are 12,300. Chris

F350s are usually 11,500 or 11,400 gvwr. RAM has the higher payload because they have 800lbs more GVWR there for adding that much more to their payload.
Me_Again
Explorer III
Mar 01, 2018
4x4ord wrote:
My Aluminum F350 has a carrying capacity of 3322. I am really surprised that the Ram, with the heavier
cast iron engine and steel body, is still a much lighter truck.

What's you GVWR, my SB RAM is 11,700. LB are 12,300. Chris
blofgren
Explorer
Mar 01, 2018
4x4ord wrote:
My Aluminum F350 has a carrying capacity of 3322. I am really surprised that the Ram, with the heavier
cast iron engine and steel body, is still a much lighter truck.

I'm not so sure about that; my truck with 3 of us in cab, full of fuel and fifth wheel hitch is over 9,500 lbs. But with 14,000 GVW, I still have plenty of wiggle room......:B
Bigfoot_affair
Nomad II
Feb 28, 2018
4x4ord wrote:
My Aluminum F350 has a carrying capacity of 3322. I am really surprised that the Ram, with the heavier
cast iron engine and steel body, is still a much lighter truck.

My steel body 2015 GMC Denali 3500 CC SWB 4X4 shows 3720lbs.
rhagfo
Explorer III
Feb 28, 2018
transamz9 wrote:
Cummins12V98 wrote:
CampingN.C. wrote:
transamz9 wrote:
CampingN.C. wrote:
So if someone were to load a 3500 SRW to max payload it sure wouldn't leave much wiggle room on the tire capacity would it ?

I have 14,560# worth of tire capacity and 12,300 gvwr. Still a little wiggle room.

Not really what I was referring to. If one were to load full payload they would be around 7000lb on the rear axle. With the average 18" 10 ply being 3640 per tire that's awful close for me.

I only bring it up because I have approx 800lbs to go before I'm at tire cap and I thought that was close until I started looking close at 3500 SRW specs.

Don't you think they have a safety margin built into the tires? They sure are not going to pop with a few extra pounds.

The ratings are test at the speed rating. My tires are rated at 106 MPH. I try not to run over 100 just to give me a little wiggle room.

I will toss ten cents into this line of thinking.
Our 2001 Ram 2500 stock OEM tire 245/75-16E rated at 3,042# ea. rear GAWR is 6,084# so while Ram only gave this truck a 8,800# GVWR, you can load the rear axles right up to the max tire rating. I will say I do have the Optional 265/75-16E @ 3,415# ea for some wiggle room.
Cummins12V98
Explorer III
Feb 28, 2018
I think my truck is limited to 104 or so.
transamz9
Explorer
Feb 28, 2018
Cummins12V98 wrote:
CampingN.C. wrote:
transamz9 wrote:
CampingN.C. wrote:
So if someone were to load a 3500 SRW to max payload it sure wouldn't leave much wiggle room on the tire capacity would it ?

I have 14,560# worth of tire capacity and 12,300 gvwr. Still a little wiggle room.

Not really what I was referring to. If one were to load full payload they would be around 7000lb on the rear axle. With the average 18" 10 ply being 3640 per tire that's awful close for me.

I only bring it up because I have approx 800lbs to go before I'm at tire cap and I thought that was close until I started looking close at 3500 SRW specs.

Don't you think they have a safety margin built into the tires? They sure are not going to pop with a few extra pounds.

The ratings are test at the speed rating. My tires are rated at 106 MPH. I try not to run over 100 just to give me a little wiggle room.
transamz9
Explorer
Feb 28, 2018
Cummins12V98 wrote:
"I have 14,560# worth of tire capacity and 12,300 gvwr. Still a little wiggle room. "

Showoff. :B

Not showing off, just stating facts. You have more wiggle room with the dually.