Drawer Hard to Open
I have NL 10.2 RR and one of the drawers is very difficult to open. The others, simply pull up and out. The one that is hard, it has to be "giggled" quite a bit to get it to release and open. I pul...
Forum Discussion
All those dually guys.... for some reason all their tools are efing a lot of the time.
I'm a single rear wheel guy and all my tools have never done that.
I'm sure glad they quit making 'Dullies' though. I don't know what I'd do with those extra spare wheels on each side.
I think there are two problems with the NL drawer guides. One is I found them to be too low in the back of the guide and not square with the face frame of the drawer cabinet. I had to shim each one up with a shim and hot glue. Second, some were not attached proper and were falling down too low going out of level (well on a camper level means nothing) it has to be square with the cabinet front. Others I had to make a better support as the rear part of the guides were plastic and breaking falling. This was on a brand new NL camper.
BTW, my NL likes my single truck they have been married now for 11 years because of that.
I'm a single rear wheel guy and all my tools have never done that.
I'm sure glad they quit making 'Dullies' though. I don't know what I'd do with those extra spare wheels on each side.
I think there are two problems with the NL drawer guides. One is I found them to be too low in the back of the guide and not square with the face frame of the drawer cabinet. I had to shim each one up with a shim and hot glue. Second, some were not attached proper and were falling down too low going out of level (well on a camper level means nothing) it has to be square with the cabinet front. Others I had to make a better support as the rear part of the guides were plastic and breaking falling. This was on a brand new NL camper.
BTW, my NL likes my single truck they have been married now for 11 years because of that.
