"EASY" Cummins 6.7 2013+ oil change!
After reading about all the horror stories about how hard and messy changing the oil on a 13 and newer 6.7 Cummins was I used all the info I gleaned from everyone and changed oil today for the first t...
Forum Discussion
gmcsmoke wrote:
On my LML it's:
1. open fumoto valve
2. place 12" x 12" piece of carboard behind oil filter
3. loosen oil filter and drain into pan.
4. remove and replace filter (hand tight) wait for the oil to drain
5. close the fumoto valve.
6. fill with oil.
it's incredibly open and simple to change oil on mine. Now greasing all 30 suspension zerks....forget it. My tire guy does it when he rotates the 250 pound tires.
That's one thing I don't miss, I just did the front of my 98. The 15 has no zerks.
