F250 Rear Axle Weight Rating with 20" wheels
Does anybody have a 2011+ F250 with 20" wheels that they can check the rear axle rating on the b-pillar sticker? I found that the F350 SRW door sticker shows 7000 lb with 20's but want to know if the...
Forum Discussion
Trucks like yours should get a premium resale, since they are almost nonexistent.
One thing to keep in mind, when getting the 20" tires and wheels is height. They are about 3"s taller than my standards, and will take away from your gearing.
It will make a difference in load cap however. If you are thinking 6.2, I would suggest the 4.30 gears, with the 20"ers. It will be hard to find 4.30s used.
If you are thinking 6.7, in a 250, it may not have much more payload than you have now.
Just a few things to think about,
Jerry
One thing to keep in mind, when getting the 20" tires and wheels is height. They are about 3"s taller than my standards, and will take away from your gearing.
It will make a difference in load cap however. If you are thinking 6.2, I would suggest the 4.30 gears, with the 20"ers. It will be hard to find 4.30s used.
If you are thinking 6.7, in a 250, it may not have much more payload than you have now.
Just a few things to think about,
Jerry
