More mod pics:
Soap dispenser in bathroom and outdoor kitchen


Access panel to the water pump. I drilled holes to access two of the four screws. Two are under the bed platform and two are located by the outside wall.
http://picasaweb.google.com/lh/photo/P56LD9rvV6erW4tJLozWDecRs4GQlOSPIbAZbcbR-VY?feat=directlink
Water pump hoses. Looks like the water pump already has flexi-hose attached to the inlet. I zip-tied the one in the second photo to keep it from banging on the wall whenever active. Also cut a mousepad in half and slid those pieces, stacked, under the water pump and rescrewed it down.
http://picasaweb.google.com/lh/photo/P56LD9rvV6erW4tJLozWDecRs4GQlOSPIbAZbcbR-VY?feat=directlink
http://picasaweb.google.com/lh/photo/PzCtBaMiBi0W27DO83vojOcRs4GQlOSPIbAZbcbR-VY?feat=directlink
http://picasaweb.google.com/lh/photo/X_kvZvttyVlK-kteV0LUYucRs4GQlOSPIbAZbcbR-VY?feat=directlink
Next is a picture of the Vortex fan installed in the bathroom. What a difference this makes!
http://picasaweb.google.com/lh/photo/i7yXrDXTCLQJNeP247snAucRs4GQlOSPIbAZbcbR-VY?feat=directlink
I started the install of the expansion/accumulator tank this evening but had to back out due to our first camping trip tomorrow. Once I get that successfully installed I will post pics as well.
Cheers!