baunno wrote:
I too have thouht of doing this as the Bullet could really use a vent fan in the main living area. I think it'll help a lot with keeping the air moving and not have to constantly run the AC. Greg, do you have pictures you can post?
I can post some pictures later this afternoon. I took a few but not too many. I already put the microwave back so I cannot take pics of where I tied in. The microwave came out very easily, just unscrew the 4 screws on the face and there is an outlet behind it where it was plugged in. Below the microwave is a pan that can be removed with 2 screws. Below the pan is the wiring going to and from the range vent hood as well as a wire going to a 120V outlet under the cabinet. Just be sure to use the wire going to the vent hood and not the outlet!