Keystone Bullet Premier
We are seriously looking at buying a 31BHPR. It pretty much has everything we are looking for in a TT, the only cons we can think of with it is, it has curtains instead of solid doors for the bedroom ...
Forum Discussion
Hello everyone,
I'm a long time lurker and former hybrid owner. This past Thursday we pick up a 2012 Bullet Premier 31BHPR. A big thank you to all who have posted in this thread. Your tips and ideas have already helped me immensely and I still have a long list of things I want to do camper (I love modding!). Anyway, I have come across an issue and I wanted to see if anyone else has had the same problem. When the dealer performed the demo last week, we started at the front end and the two LED's on the front cap were on. The deal rep turned the switch off, no big deal. This weekend I was giving my folks a tour of the camper and when I flipped the switch they didn't come on. I left the switch on and when I came out to get started on cleaning/mods the next morning, the lights were on. I immediately turned the switch off and back on and to see if they would work and they would not come back on. I have a friend who owns a 2010 Keystone Bullet 281BH and he has the same problem but between the two of us haven't been able to pinpoint the issue. Tomorrow I plan to remove the switch and spray some electrical contact cleaner in it to see if it may just be some corrosion buildup on the contacts. In the meantime, have any of you experienced this? If so what did you do to fix the problem?
I'm a long time lurker and former hybrid owner. This past Thursday we pick up a 2012 Bullet Premier 31BHPR. A big thank you to all who have posted in this thread. Your tips and ideas have already helped me immensely and I still have a long list of things I want to do camper (I love modding!). Anyway, I have come across an issue and I wanted to see if anyone else has had the same problem. When the dealer performed the demo last week, we started at the front end and the two LED's on the front cap were on. The deal rep turned the switch off, no big deal. This weekend I was giving my folks a tour of the camper and when I flipped the switch they didn't come on. I left the switch on and when I came out to get started on cleaning/mods the next morning, the lights were on. I immediately turned the switch off and back on and to see if they would work and they would not come back on. I have a friend who owns a 2010 Keystone Bullet 281BH and he has the same problem but between the two of us haven't been able to pinpoint the issue. Tomorrow I plan to remove the switch and spray some electrical contact cleaner in it to see if it may just be some corrosion buildup on the contacts. In the meantime, have any of you experienced this? If so what did you do to fix the problem?
