Leaking pipe

tmas wrote:

beemerphile1 wrote:
A pair of end cutters may be able to tighten that clamp, I've had success with them and it costs nothing to try.

What would those pliers be called? Trying to find some at Lowe's of Home Depot.

Not pliers, end cutters like I said originally.

beemerphile1 wrote:
A pair of end cutters may be able to tighten that clamp, I've had success with them and it costs nothing to try.

What would those pliers be called? Trying to find some at Lowe's of Home Depot.

downtheroad wrote:

smkettner wrote:
I would cut out the fitting and replace with Sharkbite or Gatorbite.
That white flex hose I would replace with a faucet supply line style fitting.
Home Depot or Lowes has it all.

Do what smkettner said....easy fix. Couple of bucks. Forget fooling with the dealer.

This..... much better to do little fixes like this yourself if you are handy. I tend to fix all these type of things myself so I know they are done right.

smkettner wrote:
I would cut out the fitting and replace with Sharkbite or Gatorbite.
That white flex hose I would replace with a faucet supply line style fitting.
Home Depot or Lowes has it all.

Do what smkettner said....easy fix. Couple of bucks. Forget fooling with the dealer.

Don't use regular worm clamps, they can loosen up. I found out the hard way. Home Depot has simple PEX clamp tool you can but with out breaking the bank, and the clamps. Buy the tool and a package of clamps, they are easy to install. You may find you need one late at night, and you will have them. Also get a good pair of side cutter to remove the old clamps.

A pair of end cutters may be able to tighten that clamp, I've had success with them and it costs nothing to try.

Do you have a pressure regulator installed?

This is leaking at the crimp -- not at the threads. If there's enough slack, cut the PEX at a nice round spot and replace the insert male adapter with a Sharkbite male adapter.

Bruce

Don't dismiss the possibility that the fitting itself is cracked.

That should be a clue. . Once you get it that fixed, check all fittings you can and inspect wherever you can, to include connections at hot water tank. That should be "hot" side because it is red. Hot has a tenacity to wiggle loose before the cold IMO. Inspect wherever you can, they do come loose. Inspect all the places you can to include connection at hot water tank, toilet valve and under sinks, showers. You don't know which of the fittings will work its self loose. I mark mine with a felt tip pen, index line type of thing so the next time inspecting I could see if fitting was coming loose.