Lost all power to 120v outlets
We have a (new to us) Lance 1121 (year 2000). This is our first outing and for some unknown reason, we have lost all power to 120v outlets. The fuse and breaker panel seems ok. The circuit breaker ...
Forum Discussion
Good solve
CB on our control panel has definite click with some resistance.
Small double throw CBs are available but no longer thru Generac.
Actual dimensions may vary a bit. Manual I have (D1752) states a 10 amp CB #0A8592 but many like NRALIFR listed show 15 amp #0A8592? same part number. So it be removing old one to verify rating.
Not OPs issue but if CB is not positively open/closing I'd consider replacing.
just example https://www.amazon.com/dp/B000K2O0MM
this is for a Generac Impact 36lp plus- model 0009411 which translates to a 941-1 (tag says item #-last 4 digits are model), there are manuals for most.
CB on our control panel has definite click with some resistance.
Small double throw CBs are available but no longer thru Generac.
Actual dimensions may vary a bit. Manual I have (D1752) states a 10 amp CB #0A8592 but many like NRALIFR listed show 15 amp #0A8592? same part number. So it be removing old one to verify rating.
Not OPs issue but if CB is not positively open/closing I'd consider replacing.
just example https://www.amazon.com/dp/B000K2O0MM
this is for a Generac Impact 36lp plus- model 0009411 which translates to a 941-1 (tag says item #-last 4 digits are model), there are manuals for most.
