The manual states the Electric Winch is covered under a separate manual. I am almost 100% sure yours is the same P55000 POWER WINCH made by Carefree of Colorado. You will have to look in the link I provided above to see it...
The small access hole for the 7/16-inch socket is on the opposite side of the winch house where the UP-DN switch is located. Does your POWER WINCH look like the drawings in the P55000 PDF manual I provide a link to...
My power winch is direct connected to the battery terminals and has two 25AMP circuit breakers wired in parallel.
I don't think I have any photos here of my setup
Roy Ken
