Forum Discussion
bricetribe
Dec 10, 2014Explorer
The aluminum that I chose was a combination of flat black and black diamond plate.... I didn't want to over do the use of diamond plate.
Here are some new pictures of the pieces cut and held into place with just the doors.
I am trying to decide how to deal with delamination issues in the filon fiberglass upper sections above the passenger front jack and in front of the drivers side rear jack. It is actual the paper backed Styrofoam insulation that seems to be separating.
These pictures are from before Thanksgiving.
![](http://i1314.photobucket.com/albums/t572/bricetribe/20141115_172837_zps00a0f8f3.jpg)
![](http://i1314.photobucket.com/albums/t572/bricetribe/20141116_114123_zps741cb0d0.jpg)
![](http://i1314.photobucket.com/albums/t572/bricetribe/20141123_160809_zps66f2e881.jpg)
Here are some new pictures of the pieces cut and held into place with just the doors.
I am trying to decide how to deal with delamination issues in the filon fiberglass upper sections above the passenger front jack and in front of the drivers side rear jack. It is actual the paper backed Styrofoam insulation that seems to be separating.
These pictures are from before Thanksgiving.
![](http://i1314.photobucket.com/albums/t572/bricetribe/20141115_172837_zps00a0f8f3.jpg)
![](http://i1314.photobucket.com/albums/t572/bricetribe/20141116_114123_zps741cb0d0.jpg)
![](http://i1314.photobucket.com/albums/t572/bricetribe/20141123_160809_zps66f2e881.jpg)
About Travel Trailer Group
44,025 PostsLatest Activity: Feb 06, 2025