Need lid for propane tanks

I suspect that you will just have to purchase a whole new tank cover. I doubt very much that just the lid is something you can purchase by itself.
Barney

BarneyS wrote:
I doubt very much that just the lid is something you can purchase by itself.

Of course you can - available in white or black.

Interesting! Learn something new here everyday. :) Thanks for that!
Barney

And in the U.S.
here

You might try HERE

I used some zip ties thru the slots where it attaches because I thought it was a bit iffy on whether it would stay attached

I bungy cord the whole propane cover to the frame.

I know the op was about the lid but I have always wondered how in the heck do the entire tank covers blow off. I have seen them lying on the side of the road all the time. my covers are a dear to get off and on they are so tight fitting

old guy wrote:
I know the op was about the lid but I have always wondered how in the heck do the entire tank covers blow off. I have seen them lying on the side of the road all the time. my covers are a dear to get off and on they are so tight fitting

If you push the bottles towards each other, some can be quite loose. Rarely do you see anyone use the tabs below to secure with a bungee cord.

most tank holders allow a side movement of 1/2 inch... so cover is easy or hard to remove..