Need to hire welder - help!

Know need for a welder if yours are like this.

westend wrote:
Look in the Yellow pages for welding services...

My thoughts exactly. I have several local welding shops I have used over the years. If I looked in the Yellow Pages I bet there are 30 or more welding shops in my area.

Attaching 2 jacks shouldn't be more than an hour. Around here a quality welder will cost you $75 for an hour job.

A word of advice, when you take the trailer in to have some welding done, please disconnect your batteries. I was welding a hitch receiver on the back of my trailer, didn't disconnect the batteries, and the next trip out the "mother board" on the fridge was toast. Some on this forum may remember my diesel pickup had $5000 damage because a body shop welded on the frame without disconnecting batteries. Doesn't happen often, but it's happened to me. I'd offer to weld those on for you, but my upside down stick welding looks pretty sad. Good luck, Hans.

Check muffler shops?

Do you have a trade school or community college nearby that teaches welding?? Don't take the class, contact the teacher. It may be that your project would be a good lesson or possibly recommend one of the exceptionally good students who would be able to handle it. If you could work out FREE, free is excellent! Really good welders will sometimes do jobs like this that are a snap for them, a bit of extra money, cash in hand. Too bad you don't have our next door neighbor's son handy, he's certified, has outstanding credentials and is free. Although, come to think of it, we're still waiting for him to do a 10 minute job for us, but he's working on the pipeline and putting in a zillion hours. Suggest you try the trade school/community college.

jaycocreek wrote:
Know need for a welder if yours are like this.

Actually YOU WILL need a welder some day when your frame RIPS right at the screw holes!

You have severely WEAKENED the frame at the very worst place, the BOTTOM FLANGE of it..

You should have drilled in the MIDDLE of the upright portion then added additional piece of steel for the jacks to mount to.

The best place to drill holes in the exact center of a beam, not the top or bottom flange..

That's not my trailer but I have seen them mounted that way without issue. Here is another way to mount the jacks without paying an expensive welder from RV101..

How to mount jacks without welding

Just Googled welders in Seattle. Found bunches of them. Suggest you do the same and find one close. Less expensive to go to their shop. Make a few phone calls and get your best deal. Beware of home welder and I gotta friend that bought a welder and can do it. A lot of people think they can weld....they can't.

Most all of the after market jacks come with mounting hardware so you can do it yourself... I have two sets not mounted yet and I haven't decided if I'm going to mount them using bolts/self tapping screw's or weld or both....

By the way, heartland rv has a picture of them mounted on the frame via self tapping screws just the same way as I posted the picture above.

To each his own but I ain't paying know one $75 bucks an hour for something I can do myself.

I thought you were talking about welding part of a hitch. To weld jacks onto the frame is an easy weld. Basically all the weld is doing is holding the jacks onto the frame. The welds aren't having to lift a great deal of weight. There would be some stability stress but, that's a simple weld for sure. Yea, I would do my own welds on that for sure. I would grind the paint off to metal on the frame and jacks, weld those suckers on and hit it with some black paint. It's on there forever.

I welded the tongue jack on my motorcycle trailer. The trailer will be ripped to shreds before that jack would come off. I did that with a MIG welder. It holds with two Harleys on that trailer, no problem.

You don't need a machine shop to weld those jacks. Almost hobby welder, muffler shop, mechanic, should be able to weld those things on. Just hit it with a rattle can (black paint) after it's welded.