oven

just want to add other than the oven we have not had any problems with the trailer love it and the floor plan is great

got back from trip got new oven installed seems to work fine have lite it and brought it up to temp leaving thur for about a month will wait an see

L_R_G wrote:
I had the same problem with mine, took 2 tries for the dealership to finally fix it. It was frustrating (along with the other few issues the trailer had) but once everything was finally taken care of I haven't had any issue since.

So what was the final diagnosis and solution?

I had the same problem with mine, took 2 tries for the dealership to finally fix it. It was frustrating (along with the other few issues the trailer had) but once everything was finally taken care of I haven't had any issue since.

fingers252 wrote:
final update on oven changed the parts out still didn't work new oven on way won't be in till Monday or tue leaving sat on 3 week trip luckly got small convection oven get by with all I can say if you buy a camper with suburban range in it make sure it works before u leave dealer

He lighted one of the burners on the stove and never tested the oven, since there was no reason to suspect there'd be a problem. If we did it would have probably still not shown up since it needs to come up to temperature before the problem starts. Going in tomorrow.

Had the same problem. Was the pilot assem. The pilot light hole was drilled oblong so that popping effect would happen. Called company, they sent me a new one, and new about the problem. Now all is well, works great.

final update on oven changed the parts out still didn't work new oven on way won't be in till Monday or tue leaving sat on 3 week trip luckly got small convection oven get by with all I can say if you buy a camper with suburban range in it make sure it works before u leave dealer

fingers252 wrote:
update on oven still in shop waiting on parts changing out thermocouple pilot assembly said they were told there was a flay in the way it was made so looks like might be quite a few with same problem

Well I didn't get to take it in today as the dealership had some issues with parking in their premises due to some environmental work being done next door. Going in next Saturday. The fellow there already was saying how it might take some time to get the parts in.

update on oven still in shop waiting on parts changing out thermocouple pilot assembly said they were told there was a flay in the way it was made so looks like might be quite a few with same problem

fingers252 wrote:
thanks its going back to dealer tomorrow will post later what the results are the other one had to be replaced with a new one after replaceing all the parts

Thanks. Hopefully you can share your results even before I take mine in on Friday.