CavemanCharlie wrote:
I bought some peal and stick vinyl tiles at my local discount store for a older TT I had. I put down plywood first to deal with a soft floor. They didn't stick that well at first and I had to keep putting them back down. After a few months they were fine. I found that nothing in the trailer was square and putting down one big piece of vinyl would have been a real pain what with all the different corners and out of square walls cupboards etc. I would not have liked them in my house but, in that old camper they were plenty good.
Most folks are not familiar with sheet vinyl installation. It really isn't any more difficult if the walls are out of square since the sheet is not cut to a final size and then placed over the glued floor. The sheet is usually rough cut with a margin remaining and the margin is trimmed to fit the space.