Forum Discussion

d3500ram's avatar
d3500ram
Explorer III
Oct 14, 2013

Plugged into shore power and starting the truck...?

What if the TC converter has 2 input power sources in the case of being plugged into shore power while plugged into the truck's 7-pin with the truck running? I am diligent to not have this scenario...
Truck Campers
d3500ram's avatar
d3500ram
Explorer III
Oct 14, 2013
Thanks for the info... all sounds good except that I am not using the truck's factory 7-pin. I wired direct a 10 gage cable with a continuous duty solenoid- the 12V on/off from the ignition source is fused. Am I still OK? This is my set-up going to the TC:

About Travel Trailer Group

44,056 PostsLatest Activity: May 04, 2014