power converter not working ????? help
Ok I need some help with my troubleshooting. turned on my Fun Finder for the first time and the batteries will not charge. Opened up the converter box and I have 120 volts going into the Parallax se...
Forum Discussion
Just received my Progressive Dynamics PDI 9260 today. It came with a AC plug and no wires for the DC voltage. the old one was hard wired for AC and the DC wires were connected. Pulled the old one out and cut the DC wires, wired them into the 9260 and then just ran a extension cord to make sure it would work. Hooked it all up and it did. Putting out 14.4 volts DC, pulling about 8 amp AC. I just want to make sure it worked before cutting the AC cord and hooking it up for good. I will let it cycle through the modes before I cut the power cord and wire it up for good. Camping season is almost here in Colorado can't wait. Next month will DE winterized and get it going. Yep we will have one or two more snows before warm weather is hear for good.
