Power tongue jack measurements
I need to put a new tongue jack on my hybrid. Unfortunately, I'm having issues finding measurements for all the jacks I'm looking at. They typically give the full height of the jack, but don't give ...
Forum Discussion
If it helps any I replaced the Lippert jack that came with my Coachmen Freedom Express with an UltraFab 3502. It's ALL metal construction, including the head, and the mounting plate has multiple holes which allow mounting the jack so it's turned 90 degrees and facing to the side of the trailer, thereby allowing my truck tailgate to clear the jack. The lower shaft on this particular jack is 2" while the LCI's was 2.25" so I installed a piece of hardwood to better secure the lower shaft. Works great. :B
3 Pics start here.
3 Pics start here.
