Riddle
Why would I weld a pipe to my handlebars? Remember, this is the TC forum.
Forum Discussion
hbski wrote:~DJ~ wrote:jimh425 wrote:
Am I wrong, but couldn't you get in the door without your modification if the bike was facing the other way? In any case, that would be a problem if the handle bars failed to lock. :)
To get the bike to face the opposite direction would entail cutting the MC carrier off of the 4' Super truss and re-welding it. Then I don't think I am skinny enough to get between the bars and camper to get to the door. :B
couldn't you go in from the driver's side if it were facing the other way?
Nope. The door doesn't open all the way flat against the camper due to the gray water valve.
or move the bike a bit further toward the driver's side?
Nope again. Welding the pipe to the bars was much simpler and easier than moving the welded on MC carrier.
