Forum Discussion

Mikell's avatar
Mikell
Explorer
Jan 05, 2019

Roadmaster Antisway Bar and AirLift Airbags

I have a 2005 Ford F-350 diesel, dually carrying a 2005 Lance 1181. I installed AirLift airbags (LoadLifter 5000 Kit 57394) and would now like to install the Roadmaster antisway bar RM-1139-165 but am concerned about the larger antisway bar bushings interfering with the placement of the airbag bottom bracket. Has anyone with my configuration successfully installed this antisway bar with these airbags?
Truck Campers
  • Buzzcut1's avatar
    Buzzcut1
    Nomad II
    Jan 08, 2019
    just checked the dually, there may be a cleareance issue with the inside foreward threaded rod from the arilift mount. But that is excess rod that hangs down 3-4" past the nuts on the airbag mount. I see no issue with trimming off that excess length.
  • Buzzcut1's avatar
    Buzzcut1
    Nomad II
    Jan 08, 2019
    Mikell wrote:
    I did call Roadmaster. They have no information regarding a potential interference. I was hoping someone on this forum has successfully installed both.


    I have Airlift 5000s and a Roadmaster antisway bar on my 03 f350 4x4 crew cab long bed SRW, it fit fine. all the attachment points are the same as stock. Lemme go out and look at my 2011 dually it has the airlift extreme 5000s and the stock ford antisway bar just to check to see if there is a difference in the mount spots for the bar.
  • Mikell's avatar
    Mikell
    Explorer
    Jan 08, 2019
    I did call Roadmaster. They have no information regarding a potential interference. I was hoping someone on this forum has successfully installed both.

About Travel Trailer Group

44,029 PostsLatest Activity: Jan 28, 2025