Safety Mod Pass Through to Truck Window

I don't know about driving at 120 degrees, but the pass through works well for more moderate temps like the mid 90s. I have never even had to assist with the fantastic fan.

Just drive that thing somewhere where it ain't 120 degrees! Haha

Got to 95 here today, sweatin balls out ! If I were in your shoes I'd point that thing towards the nearest Mountian and not stop til I got there!
Stay safe......and cool!

REPORT from the trip with 16" inner tube installed.
The tube did leave small gaps around high bed light/camera housing, so I might have to work on it a bit more. Making the tube oval would be perfect, so maybe some strap will do the trick.
To top it, the camper slide covers almost 1/2 truck window opening, so forget about safety pass unless you can move the slide, but anyway, spend most of the day driving when morning temp were in 110's while coming to Las Vegas I had solid 118F for last 2 hr .
Set truck blower to mid-range speed and in the time the camper interior without truck air could reach 125-130F, the thermometer on countertop did show 102F.
So I am pretty sold on the idea.
Hopefully with better sealing, setting truck blower to max and camper rear Fantastic to low exhaust, I could get the camper down to comfortable temperatures even in extreme heat.
Now 1 hr after entering the house, starting with huge evaporative coolers and than switching to AC I managed to lower the interior to 96F.
Still 1 more hr of full sunshine, so I will head for cold shower.

That is good stuff. I used to buy it from U-Line but found out Walmart has it much cheaper. Not on thread but I use it to affix my Click and Ship labels on my packages that I ship worldwide for the company I own. Stuff sticks about anything to about anything.

SidecarFlip wrote:

MN Ben wrote:
Could you use one of those swimming pool noodle floaties?

I would say no, the vinyl is too thin, but worth a shot anyway, it's cheap.

I wonder if you could stack the noodles? For tying some foam body flies for fishing I use 3M Super 77 Spray Adhesive to stack different colors of foam. Maybe use a little painters tape so the spray only coats a strip down one side of each noodle. Spray on then press together, give a few minutes to set and you have a double thickness noodle.

Just a thought...

The inner tube I bought at TSC works fine (for me). Not sure it would stand up to a cat however. The real test will be driving up and down out dirt road when it's dry and dusty.

My camper sits pretty close to my back sliding window anyway

MN Ben wrote:

SidecarFlip wrote:

MN Ben wrote:
Could you use one of those swimming pool noodle floaties?

I would say no, the vinyl is too thin, but worth a shot anyway, it's cheap.

I tried it this weekend. It was down and dirty as a stationary device to deter the cats from sneaking between the camper and the truck window. My wife did not want to allow her cat to go through because she claws her way to get into/out of other areas and would most likely bust my hack job apart. I will try an inner tube or upholstery foam next time.
Ben

I know about cats, my wife has a multitude of them and they all have claws...and they all like to 'climb' my leg. Wonderful thing.

Kayteg1 wrote:
Took 15 miles trip to Tractor Supply today.
The biggest inner tube they had was 16" but looks good for the air exchange purpose.
They also have good selection of metric bolts, what I will need for my Generac.
Plan to put the camper back on truck this weekend, so will add a picture.
With 120F weather I sure hope the air from the truck will keep the camper below 100F so I don't get all sweat just by opening the door.

I got my truck inner tube at Auto Zone, I believe they have larger size ones than Tractor supply

Took 15 miles trip to Tractor Supply today.
The biggest inner tube they had was 16" but looks good for the air exchange purpose.
They also have good selection of metric bolts, what I will need for my Generac.
Plan to put the camper back on truck this weekend, so will add a picture.
With 120F weather I sure hope the air from the truck will keep the camper below 100F so I don't get all sweat just by opening the door.

SidecarFlip wrote:

MN Ben wrote:
Could you use one of those swimming pool noodle floaties?

I would say no, the vinyl is too thin, but worth a shot anyway, it's cheap.

I tried it this weekend. It was down and dirty as a stationary device to deter the cats from sneaking between the camper and the truck window. My wife did not want to allow her cat to go through because she claws her way to get into/out of other areas and would most likely bust my hack job apart. I will try an inner tube or upholstery foam next time.
Ben