So the project begins
Ok, lets start off by saying that getting the TC out of the truck was one of the most stressful things Ive done in a long time. I did it by myself and I'm thinking if I didn't take breaks due to the e...
Forum Discussion
I could quote myself on my last post so everyone can pick on me but Ill let you do it from the privacy of your own home.
I started to work on the rear drivers jack and this is what I found. I feel like the camper is like sitting at a **** table...
I went digging into the wall because I noticed after I buttoned the other corner down the tie down for the front corner tightened up nicely which left me bothered with the fact that the back one is wiggling and they are not suppose to do this.
MORE OF WIGGLE WIGGLE WIGGLE
This leaves me with no choice but to take the advice given much earlier and roll up the siding. My question is before I bend this any more then I already have how in #@&*%#@ do you get it off?
Thanks
Ed
I started to work on the rear drivers jack and this is what I found. I feel like the camper is like sitting at a **** table...
I went digging into the wall because I noticed after I buttoned the other corner down the tie down for the front corner tightened up nicely which left me bothered with the fact that the back one is wiggling and they are not suppose to do this.
MORE OF WIGGLE WIGGLE WIGGLE
This leaves me with no choice but to take the advice given much earlier and roll up the siding. My question is before I bend this any more then I already have how in #@&*%#@ do you get it off?
Thanks
Ed
