Stable load question
I will be receiving my stable loads this Friday. I have been watching you-tube on how to install them on my truck. I own a 2011 Ford F250 and a Lance 825 TC which I estimate will weight approx. 2700...
Forum Discussion
*Disclaimer* Mine is a 2001 with a different style of leaf pack.
However, If I remember correctly, each shim is 1/4 inch thick. I used 2 on on the front, and all three on the rear. The front 2 just slide under and make contact with no load. The rear is an inch away and likely only hits on large bumps. I wish the rear set was thicker, adn have considered making at least one larger plate to go under the stock ones.
However, If I remember correctly, each shim is 1/4 inch thick. I used 2 on on the front, and all three on the rear. The front 2 just slide under and make contact with no load. The rear is an inch away and likely only hits on large bumps. I wish the rear set was thicker, adn have considered making at least one larger plate to go under the stock ones.
