Stop Light/turn signal blowing bulb
I keep blowing bulbs on the left side of my travel trailer. Fuse remains intact. Any idea why the bulb would blow and not the fuse? What should I check? Thanks
Forum Discussion
Bad or marginal ground can cause this issue.
Or even lose fit in socket.
Back when I ran incandescent bulbs in truck taillights I would put a half pea sized dab of silicone on the glass near base. Old hands said it helped, absorbed vibration before it got to filament. Seamed to help.
Or even lose fit in socket.
Back when I ran incandescent bulbs in truck taillights I would put a half pea sized dab of silicone on the glass near base. Old hands said it helped, absorbed vibration before it got to filament. Seamed to help.
