Storing WD hitch when parked
Do you remove your WD hitch head when you are parked? What do you do with it? My Curt head weighs about 80# I can lift it ok and set it on the tail gate of my truck but that is as far as it gets. ...
Forum Discussion
I have a pass through in the front of the trailer. I built a shallow wooden box using 2*4 on each side and one end then plywood top and bottom. This box is wide and long enough to fit the bars. The box lies on the floor in which the bars slide into, then the head sits on top. With this setup the dirty bars and head do not mess up the storage area. Storage containers can also sit ontop of this box.
