testing electric brakes without t.v.
The last time I moved my 5rd, the brake controller on my f 350 flashed a brake issue error message. They worked when I moved manual brake lever on the controller or engaging foot brake. I suspect on...
Forum Discussion
Another thought on taping into each wheel magnet brake wire with an external 12VDc source.. These are pretty important on being sure they are making a good connection. I don't know if I would want to disturb any of these connection just to make a test. I might not get them tightned back up like they should be.
Use a compass - listen for a tone- or use a clamp-on DC ampmeter (SEARS or AMAZON) to read 3AMPS on each brake wire... Or spin the wheel and see if it engages when turned. ALso my brakes make a somewhat loud mechanical noise when being engaged..
Roy Ken
Use a compass - listen for a tone- or use a clamp-on DC ampmeter (SEARS or AMAZON) to read 3AMPS on each brake wire... Or spin the wheel and see if it engages when turned. ALso my brakes make a somewhat loud mechanical noise when being engaged..
Roy Ken
