Forum Discussion
SidecarFlip
May 23, 2017Explorer III
Been reading along the who time... I don't use levelling blocks. Storage is already an issue, don't need more stuff riding along. I look it this way. the truck's suspension with the camper in the bed will squat about 2", there is a name for that, cannot think of it offhand but what I do is drop the rear (solid mount tiedowns and level the camper with the rear jacks, leaving the front spring loaded tiedowns attached. Never had an issue plus the camper is much more solid when inside. I realize that if the camper was lower in the front than the back it would not work. I just turn turn the truck to face the opposite way.
My suspension has always had enough 'sag' thats the word I was looking for, to level the unit with 1/2 bubble.
Always a screw or nail issue I agree but so far (knock on wood) I haven't had that issue arise.
Your mileage may vary but that's my regimen
My suspension has always had enough 'sag' thats the word I was looking for, to level the unit with 1/2 bubble.
Always a screw or nail issue I agree but so far (knock on wood) I haven't had that issue arise.
Your mileage may vary but that's my regimen
About Travel Trailer Group
44,029 PostsLatest Activity: Mar 15, 2025