twisting jacks
Does anyone else have this issue? When raising or lowering the TC, only one of my front jack brackets pull away from the camper a little bit at the base of the plate and bottom lag bolt, then when res...
Forum Discussion
bighatnohorse wrote:
I would check that jack (and the others) to insure that it is plumb.
I agree with this! AND if there is putty squishing out frpom behind the jack mounting plate this will cause and issue too, because the plate movement will translate to a larger movement at the foot.
Solution: remove plates, scrape off all putty TC corners and plates, reinstall using Slikaflex 221 as the sealant...this is what Lentz will do when reinstalling my jacks on the rebuild. Then the movement issue should be handled. Got this from the rebuild pros at Lentz.
