Forum Discussion

mleekamp's avatar
mleekamp
Explorer
May 02, 2015

U-bracket for WD bars ... issue with self tapping screws

Hey all. My U-brackets on the TT frame that hold the weight dist bars is held in place with 2 self tapping screws on the front, and a set screw in the back. I assume this is typical set up since I'v...
WyoTraveler's avatar
WyoTraveler
Explorer
May 02, 2015
My previous TT had an opening at the front. They make nut and bolt sets where the nut has long wire attached. Don't recall the name but with the wire attached you can slide the nut inside the channel. After chinching it up tight cut the wire.

About Travel Trailer Group

44,052 PostsLatest Activity: Nov 04, 2025