Forum Discussion
sleepy
May 16, 2013Explorer
I had a pm request for measurements... I should have included them. I went out and cnfirmed my measurements accross the back.
The exact outside corner to corner measurement accross the back is 94 inches
From the outside of the jack tube to the outside of the opposite jack tube is 96 inches (8')
and the extreme widest point would include the jack base disks... at about 98 inches (8'2")
The campers whole 4' overhang behind the truck bed is the same width as the dually fenders outside to outside.
And so, we'd still be driving an 8 foot wide load, 2 foot off the ground even it the camper was mounted on a go cart.
I won't tell Janet... it might scare her and she'd quit taking her turns at driving.
The exact outside corner to corner measurement accross the back is 94 inches
From the outside of the jack tube to the outside of the opposite jack tube is 96 inches (8')
and the extreme widest point would include the jack base disks... at about 98 inches (8'2")
The campers whole 4' overhang behind the truck bed is the same width as the dually fenders outside to outside.
And so, we'd still be driving an 8 foot wide load, 2 foot off the ground even it the camper was mounted on a go cart.
I won't tell Janet... it might scare her and she'd quit taking her turns at driving.
About Travel Trailer Group
44,029 PostsLatest Activity: Jan 28, 2025