What did you do to your Camper Today?
After a good washing yesterday I got up early (while the camper is in the shade and the temp has not exceeded 100--yet) to put a good coat of Meguiar's Marine/RV one step Cleaner Wax on. I'm a huge f...
Forum Discussion
Disassembled the window I was using from Mr. Kit to replace the missing pass thru window (Last owner had filled it in with a piece of foil faced foam board and aluminum ducting tape (Ungluing the glass pane was all kinds of butt pucker), reverse which side was the slider by flipping the middle and side pieces, then reassembled it and glued the glass pane back in with a flexible automotive seam sealer.
Cleaning the window edges and trimming it out with under flashing (The original window was 3/4" taller, so flashing it around the perimeter to make the edge fully water tight) and then finally installing a window in the opening that's been open to the world since 2015 when I started the resto.
Cleaning the window edges and trimming it out with under flashing (The original window was 3/4" taller, so flashing it around the perimeter to make the edge fully water tight) and then finally installing a window in the opening that's been open to the world since 2015 when I started the resto.
